Netopia CLI 874 - Manual (Page 130)

2-118 Command Line Interface Commands Reference
Serial port modem backup configuration commands
interface serial id modem directory-number string
no interface serial id modem directory-number
show interface serial id modem directory-number string
These commands allow you to set, disable, or show the modem director y number for the specified serial
inter face. The string parameter can contain up to 15 characters. Non-dialable characters are allowed, but
ignored.
Note: The 4000-Series data routers have one serial por t, and its id is "0" (zero).
interface serial id modem baud string
show interface serial id modem baud
These commands allow you to set or show the baud rate for the specified serial por t. Permissible values for the
string parameter are 9600, 19200, 38400, 57600, 115200.
interface serial id modem init-string string
no interface serial id modem init-string
show interface serial id modem init-string
These commands allow you to set, delete, or show the modem initialization string for the specified serial por t.
Consult your modem’s documentation or the AT command set for an appropriate initialization string. The string
parameter can contain up to 31 characters.
Serial Port Modem Backup Configuration Commands
interface serial id modem directory-number string
no interface serial id modem directory-number
show interface serial id modem directory-number string
interface serial id modem baud string
show interface serial id modem baud
interface serial id modem init-string string
no interface serial id modem init-string
show interface serial id modem init-string
interface serial id mode { console | modem }
show interface serial id mode