Netopia CLI 874 - Manual (Page 28)

2-16 Command Line Interface Commands Reference
user name password [ { wan | lan | cp | nat | pvc | global | subnet | no-telnet }*]
show user
no user name
These commands allow a Superuser to create, show, or delete a user and his/her access privileges. A user can
change only his/her own password, and cannot change their access privileges. If a Superuser creates a new
user, this user inherits the privileges of the first non-Superuser, or has the default access privileges of lan |
subnet | nat | cp | global if there is no non-Superuser configured.
Permissible modifiers are:
Interface Configuration Commands
Additional LAN configuration command
Note: Beginning with Firmware Version 8.4.2, the firmware includes suppor t for creating additional logical
local area networks. When used in combination with VLANs (see “Vir tual LAN (VLAN) configuration commands”
on page 2-36 ), you can maintain separate functional end-to-end networks to suppor t such ser vices as
voice-over-IP, point-of-sale applications, or audio and video ser vices.
Multiple logical IP LAN suppor t allows you to create additional IP routed LAN inter faces (ALANs). You can add,
edit, or delete Additional LANs similarly to Connection Profiles on the WAN connection. You then associate
physical or logical Ethernet-encapsulated inter faces, such as wired Ethernet por ts, wireless SSIDs, and ATM
RFC 1483 bridged VCs by attaching the ALAN to a VLAN containing these inter faces.
The additional LAN IP routed inter faces duplicate all the same parameters that apply to the primar y LAN
inter face, such as DHCP ser vers, filtersets, multicast for warding, and RIP. You can configure up to six ALANs.
wan WAN inter face(s) configuration
lan LAN (Ethernet id) inter face configuration
cp connection profile (and default profile) configuration
nat
Network Address Translation configuration. This includes the ability to configure NAT
attributes in connection profiles.
pvc
ATM PVC and Frame DLCI configuration
global
other parameters, such as console preferences. This includes ping and traceroute
functionality.
subnet
LAN (Ethernet 0) inter face ip subnet configuration
no-telnet Prevents Telnet access.