Netopia CLI 874 User Manual
Page 104
2-92 Command Line Interface Commands Reference
wireless privacy [ off | wep-manual | wep-auto | wpa-psk | wpa-802.1x ]
show wireless privacy
These commands allow you to specify, show, or disable the different types of wireless privacy.
Five possible arguments can be set for the privacy command:
wireless psk hex_string
no wireless psk
show wireless psk
These commands allow you to specify, disable, or show the Wi-Fi Protected Access (WPA) pre-shared secret key,
when wireless privacy is set to wpa-psk. The pre-shared secret key can be 8 – 63 alphanumeric characters or
64 hex digits. Entering a blank key will reset the pre-shared key.
wireless passphrase 1..57_character_string
show wireless passphrase 1..57_character_string
These commands allow you to set or show a passphrase when wireless privacy is set to wep-auto.
off
turn off privacy
wep-manual
In this mode you enter encr yption keys. Command syntax for entering encr yption keys is
described in the previous section.
wep-auto
In this mode you enter a passphrase. Command syntax for entering a passphrase is
described below.
wpa-psk
In this mode you specify a pre-shared secret key (psk). Command syntax for entering a
pre-shared secret key is described below.
wpa-802.1x
In this mode you specify a RADIUS ser ver to be used for user authentication. Command
syntax for configuring RADIUS ser ver parameters is described in
Configuration Commands” on page 2-119.
Note: The wpa-802.1x option is suppor ted beginning with Firmware Version 8.4.2.