Netopia CLI 874 - Manual (Page 135)

Motorola Netopia® Router CLI Commands 2-123
ip filterset "Basic Firewall" in 2 protocol tcp source nc destination
eq 6000 any
Note: Some commands, when dumping existing canned filters, exceed 78 characters and will wrap. To work
around this limitation use truncated keywords.
no
Syntax corresponds to the syntax for show.
Hardware Acceleration Configuration Commands
hardware acceleration enable { yes | no }
no hardware acceleration enable
show hardware acceleration enable
These commands allow you to enable, disable, or show the status of hardware acceleration if the XL accelera-
tion/encr yption daughtercard is installed in the R-Series router, or if the 4000-Series router has onboard
acceleration capability (XL models).
In the unlikely event of a hardware acceleration card failure, the no hardware acceleration enable command
allows you to turn off hardware acceleration. This will disable IPcomp compression.
Hardware Acceleration Configuration Commands
hardware acceleration enable { yes | no }
no hardware acceleration enable
show hardware acceleration enable