Netopia CLI 874 - Manual (Page 61)

Motorola Netopia® Router CLI Commands 2-49
ADSL WAN Interface configuration commands
interface adsl id pvc vpi-value vci-value
show interface adsl id pvc
These commands allow you to set, change, or show the PVC VPI and VCI values associated with the ADSL WAN
inter face.
show interface adsl id status
This command allows you to display the status of the specified ADSL inter face. For an ADSL inter face, the
possible status strings and their meanings are:
show interface adsl id statistics
Note: This command is suppor ted beginning with firmware version 8.5.
ADSL WAN Interface Configuration Commands
interface adsl id pvc vpi-value vci-value
show interface adsl id pvc
show interface adsl id status
show interface adsl id statistics
interface adsl id signaling-mode { fdm | echo-cancellation }
show interface adsl id signaling-mode
interface adsl id trellis-coding { yes | no }
show interface adsl id trellis-coding
no interface adsl id trellis-coding
Status String Meaning
Connected at xxx rx / yyy tx Kbps The inter face is connected to the DSLAM at the specified
speeds, where xxx is the downstream (receive) speed and yyy
is the upstream (transmit) speed, each in Kbps.
Activation Backoff The ADSL inter face is between connection attempts.
Down The ADSL inter face is not yet initialized.
No signal from DSLAM The ADSL inter face is not detecting a signal from a DSLAM.