Netopia CLI 874 - Manual (Page 67)

Motorola Netopia® Router CLI Commands 2-55
show interface sdsl id status
This command allows you to display the status of the specified SDSL inter face. For a cell-based SDSL (R7200)
inter face, the possible status strings and their meanings are:
Priority Queuing (TOS bit) Commands
interface { adsl | sdsl | t1 | serial } id priority-queuing enable { yes | no }
no interface { adsl | sdsl | t1 | serial } id priority-queuing enable
show interface { adsl | sdsl | t1 | serial } id priority-queuing enable
These commands allow you to enable, disable, or show the priority queuing (TOS) setting for the specified WAN
inter face.
Status String Meaning
Connected at xxx Kbps The inter face is connected to the DSLAM at the specified
speed.
Tr ying xxx Kbps The SDSL inter face is attempting to connect to the DSLAM at
the specified speed.
Activation Backoff The SDSL inter face is between connection attempts.
Down The SDSL inter face is not yet initialized.
No signal from DSLAM The SDSL inter face is not detecting a signal from a DSLAM.
Priority Queuing Configuration Commands
interface { adsl | sdsl | t1 | serial } id priority-queuing enable { yes | no }
no interface { adsl | sdsl | t1 | serial } id priority-queuing enable
show interface { adsl | sdsl | t1 | serial } id priority-queuing enable