Netopia CLI 874 - Manual (Page 33)

Motorola Netopia® Router CLI Commands 2-21
Ethernet Interface IP Address Serving Commands
interface ethernet id address-serve clients { any | none | { bootp | dhcp | macip | wan }
+
}
no interface ethernet id address-serve clients { any | { bootp | dhcp | macip | wan }
+
}
show interface ethernet id address-serve clients
interface ethernet id address-serve dhcp enable { yes | no }
no interface ethernet id address-serve dhcp enable
show interface ethernet id address-serve dhcp enable
interface ethernet id address-serve dhcp dns [ 1 | 2 ] ip-addr
interface ethernet id address-serve dhcp lease-time hours
show interface ethernet id address-serve dhcp lease-time
interface ethernet id address-serve dhcp option 150 address www.xxx.yyy.zzz
no interface ethernet id address-serve dhcp option 150 address www.xxx.yyy.zzz
show interface ethernet id address-serve dhcp option 150 address
show interface ethernet id address-serve dhcp addresses
show interface ethernet id ip dhcp client status
interface ethernet id ip dhcp client [ renew | release ]
interface ethernet id address-serve dhcp next-server ip-addr
interface ethernet id address-serve gateway { gw-ip-addr | default { ip-addr/mask-bits |
ip-addr mask } }
show interface ethernet id address-serve gateway
interface ethernet id address-serve helper ip-addr
no interface ethernet id address-serve helper [ip-addr]
show interface ethernet id address-serve helper
interface ethernet id address-serve mode { relay | server }
show interface ethernet id address-serve mode
interface ethernet id address-serve range { auto | from-addr to-addr }
no interface ethernet id address-serve range from-addr to-addr
show interface ethernet id address-serve range
interface ethernet id address-serve { no | off | on | yes }
no interface ethernet id address-serve
show interface ethernet id address-serve