Gre connection profile configuration commands – Netopia CLI 874 User Manual
Page 167
![background image](/manuals/192152/167/background.png)
Motorola Netopia® Router Connection Profile Commands 3-23
cp { name | index } l2tp authentication passphrase string
This command sets the local (i.e. LAC/LNS) passphrase. The passphrase must be at least eight characters in
length. This value is used to establish the shared secret key that must be present when a LAC/LNS pair wants
to authenticate an L2TP tunnel.
cp { name | index } l2tp authentication ppp type { pap | chap }
show cp { name | index } l2tp authentication ppp
These commands allow you to specify an L2TP authentication type, PAP or CHAP, for a par ticular connection
profile specified by name or index.
cp { name | index } l2tp authentication ppp { send | receive } name string
show cp { name | index } l2tp authentication ppp { send | receive } name
These commands allow you to set or show the user name as an alphanumeric string that the specified
connection profile will use for L2TP authentication.
cp { name | index } l2tp authentication ppp { send | receive } password string
show cp { name | index } l2tp authentication ppp { send | receive } password
These commands allow you to set or show the password as an alphanumeric string that the specified
connection profile will use for L2TP authentication.
cp { name | index } l2tp compression { none | standardlzs }
no cp { name | index } l2tp compression
show cp { name | index } l2tp compression
These commands allow you to specify, disable, or show the PPP compression algorithm, if any. The current
options are none (for no compression) and standardlzs for compression.
GRE Connection Profile Configuration Commands
Note:
The commands in this section are suppor ted beginning with Firmware Version 8.4.
cp { name | index } gre ip partner ip-addr
show cp { name | index } gre ip partner
These commands allow you to specify or show the par tner IPv4 address associated with the local GRE tunnel
connection profile.
cp { name | index } gre ip via ip-addr
show cp { name | index } gre ip via
These commands allow you to specify or show the gateway (next hop for warding) address used when routing
GRE (tunneled) packets to the par tner. when the par tner IP and the remote IP addresses are on the same
subnet.