Netopia CLI 874 - Manual (Page 64)

2-52 Command Line Interface Commands Reference
interface sdsl id clock rate rate-specification
show interface sdsl id clock rate
These commands allow you to set, change, or show the data rate associated with the SDSL WAN inter face.
Note: The permissible values for rate-specification depend on the type of SDSL WAN inter face. For
frame-based SDSL (R7100) inter faces, rate-specification may be replaced with:
{ 160 | 208 | 320 | 416 | 784 | 1040 | 1568 }
For cell-based SDSL (R7200) inter faces, rate-specification may be replaced with:
{ 144...2320 } [{ hunt | locked }]
See the table on the next page for possible rate specifications.
Also, data rate is accepted as a synonym for clock rate.