Netopia CLI 874 - Manual (Page 51)

Motorola Netopia® Router CLI Commands 2-39
RADIUS Authentication Profile configuration commands
Note: The commands in this section are suppor ted beginning with Firmware Version 8.4.2.
authprofile id [ yes | no ]
This command allows you to create or delete an authentication profile identified by id containing relevant
information to access a RADIUS ser ver. You associate the profile with a VLAN using the vlan 8021x authprofile
command (
page 37 ).
authprofile id tag string
This command allows you to name an authentication profile identified by id with a free-form name of up to 32
characters.
authprofile id remote server string
This command allows you to specify the RADIUS ser ver’s IP address or fully qualified ser ver name.
authprofile id remote secret string
This command allows you to specify the RADIUS ser ver CHAP secret.
authprofile id alternate server string
This command allows you to specify an alternate RADIUS ser ver, if available.
Authentication Profile Configuration Commands
authprofile id [ yes | no ]
authprofile id tag string
authprofile id remote server string
authprofile id remote secret string
authprofile id alternate server string
authprofile id alternate secret string
authprofile id radius identifier string
authprofile id radius port { 1 ...65535 }
show config authprofile id