Dhcp option groups commands, Dhcp option groups commands -81 – Netopia CLI 874 User Manual

Page 93

Motorola Netopia® Router CLI Commands 2-81

DHCP Option Groups commands

ip dhcp option-group tag [ gen-option gen_option_tag ]
show ip dhcp option-group tag
no ip dhcp option-group tag [ gen-option gen_option_tag ]

These commands allow you to set, display, or disable one of up to eight DHCP Option Groups. Each Option
Group can have a name of between 1 and 15 characters. The name is used in the DHCP filterset syntax to
choose what group of gen-options is to be ser ved to a par ticular DHCP Client.

Option Groups refer to gen-options; they do not contain them. Deleting a gen-option from an option group does
not delete the option. Adding a gen-option to an option-group does not preclude it from being added to another
option-group.

interface ethernet id address-serve dhcp default-option-group option_group_tag
show interface ethernet id address-serve dhcp default-option-group
no interface ethernet id address-serve dhcp default-option-group

These commands allow you to set, display, or disable the option group specified by option_group_tag as the
default.

DHCP Option Groups commands

ip dhcp option-group tag [ gen-option gen_option_tag ]
show ip dhcp option-group tag
no ip dhcp option-group tag [ gen-option gen_option_tag ]