Netopia CLI 874 - Manual (Page 112)

2-100 Command Line Interface Commands Reference
schedule id periodic interval ( 15min | 30min | 1hour | 2hour | 3hour | 4hour | 4hour | 8hour )
If you specify periodic, this command allows you to specify for how long the system will retr y to bring up the
connection.
schedule id random interval { xxx }
If you specify random-retry, this command allows you to set the upper limit for the number of minutes to use for
the retr y time (the attempts after the first three attempts). It accepts values of 1 – 255 minutes; the default
setting is 5 minutes. With a setting of 5 minutes it will tr y ever y 0 – 300 seconds after the first three retries to
bring up the connection.
schedule id cp cp_name
This command allows you to specify the Connection Profile to be used by this Scheduled Connection to connect.
schedule id date ( sunday | monday | tuesday | wednesday | thursday | friday | saturday | weekdays |
weekends | everyday )
This command allows you to specify which days of the week the Scheduled Connection will be invoked.
schedule id start time HH:MM ( am | pm )
This command allows you to set the star ting time, and whether AM or PM, for the specified Scheduled
Connection. You must enter the time in the format HH:MM, where HH is a one- or two-digit number representing
the hour and MM is a one- or two-digit number representing the minutes. The colon is mandator y. For example,
the entr y 1:3 (or 1:03) would be accepted as 3 minutes after one o’clock. The entr y 7:0 (or 7:00) would be
accepted as seven o’clock, exactly. The entries 44, :5, and 2: would be rejected.
Default Profile Configuration Commands
dp ip dhcp client mode { standard | copper-mountain | cmn }
show ip dhcp client mode
These commands allow you to set or show the router’s Default Profile DHCP mode, whether standard, cop-
per-mountain, or cmn.
The default profile, and IP configuration structures include a dhcp client mode setting that selects between the
standard RFC 2131 standards-based mode of operation (the default), and the copper-mountain or cmn
proprietar y mode of operation.
Default Profile Configuration Commands
dp ip dhcp client mode { standard | copper-mountain | cmn }
show ip dhcp client mode