HP B1000 - Manual (Page 190)

190 Chapter 6
Boot Console Handler
Obtaining and Updating System Firmware
Cannot get module’s product string. Continuing
Please wait while I examine the LIF for F/W files: Done.
Type HELP for command information.
File Name | Intended Product | Version
------------+--------------------------------+----------
PDC | Forte/Allegro Firmware (PDC) | 1.1
**************************************************************
* WARNING! *
* Downloading incorrect F/W to a module can cause permanent *
* damage to the module or card you are downloading to. *
* DO NOT INTERRUPT THIS PROCESS OR THE MODULE MAY BE DAMAGED!*
**************************************************************
F/W file Note:
Built Tue Mar 9 10:11:58 MST 1999 by fwbtr.
Continue ([y]/n)? y
**************************************************************
* CPU Firmware will now be downloaded. It should take no *
* more then 2 minutes. When the Firmware is successfully *
* downloaded the CPU will automatically reboot. However, if *
* The download failed and the system is hung, you will most *
* probably have to replace the Flash Memory chip manually. *
* Rebooting manually may work but most likely will not. *
**************************************************************
**************************************************************
* Firmware downloaded SUCCESSFULLY! *
**************************************************************
THIS UTILITY WILL NOW RESET THE SYSTEM....