HP B1000 - Manual (Page 120)

120 Chapter 4
Field Replaceable Units
FRU Removal and Replacement
Figure 4-25. Installing the CD Drive
6. Slide the CD Drive and its bracket into the system unit chassis as shown in Figure 4-25.
There are runners on the side of each bracket and guides inside the CD Drive chassis
that will help the assembly to slide into place.
7. Tighten the two CD Drive bracket screws as shown in Figure 4-26.
Figure 4-26. Tightening the Bracket Screws
8. Plug the ATAPI and power cables into their appropriate connectors. Note that the
connectors are keyed for proper insertion. See Figure 4-27.
CD Drive Bracket Guide
CD Drive
Blank Filler Screws
Bracket Screws CD Drive Bracket Runner
Bracket
Screw
(hidden)
Bracket Screw