HP B1000 - Manual (Page 169)

Chapter 6 169
Boot Console Handler
Displaying and Setting Paths
Handler” earlier in this chapter, and then type the following at the prompt and press Enter :
Main Menu: Enter command > path path_type path
where path_type is one of the path types listed in Table 6-1. and path is the specification of
the path in Mnemonic Style Notation (as described in Table 6-2.). For example, to set the
primary boot path to a SCSI disk with an ID of 6.0, follow the directions in “Accessing the
Boot Console Handler” earlier in this chapter, and then type the following at the prompt:
Main Menu: Enter command > path pri fwscsi.6.0