Boot console handler:fastboot mode, When, To display the status of – HP B1000 User Manual
Page 180: To disable, To enable, Displaying and setting fastboot mode
180
Chapter 6
Boot Console Handler
Displaying and Setting Fastboot Mode
Displaying and Setting Fastboot Mode
When
fastboot
is enabled (set to on), the workstation does a quick check of the memory
and skips some processor self tests during the power-on self tests. This enables the
workstation to complete its boot process quicker. The default factory setting is for
fastboot
to be enabled (set to on).
When
fastboot
is disabled (set to off), more extensive memory and processor testing is
performed during the self tests, causing the boot process to take longer.
If you are experiencing difficulty in booting the workstation, set
fastboot
to off and reboot
the system. The more extensive testing may reveal the error condition.
To display the status of
fastboot
, type the following at the prompt and press
Enter
:
Configuration Menu: Enter command> fastboot
To disable
fastboot
, type the following and press
Enter
:
Configuration Menu: Enter command> fastboot off
To enable
fastboot
, type the following and press
Enter
:
Configuration Menu: Enter command> fastboot on