Setting the, To set the monitor type for, This will take effect on the next reboot – HP B1000 User Manual
Page 172: Monitor information, Graphics(2), Configuration menu: enter command, Setting the monitor type
172
Chapter 6
Boot Console Handler
Displaying and Setting the Monitor Type
Setting the Monitor Type
You can set the monitor type for a graphics adapter by typing the following at the prompt
and pressing
Enter
:
Configuration Menu: Enter command> monitor graphics(
n) tt
Where n is the number of the graphics adapter and tt is the monitor type. To display a list
of supported monitors that are used by the graphics card, type the following command at
the prompt and press
Enter
:
Configuration Menu: Enter command> monitor list
A list of valid monitor types similar to the following is displayed:
MONITOR INFORMATION
Path
Slot Head Type
Size
Freq Class
----
---- ---- ----
--------- ---- -----
GRAPHICS(2)
2
1
1
1280x1024 75Hz PCI
GRAPHICS(2)
2
1
2
1280x1024 75Hz PCI, Double buffered
GRAPHICS(2)
2
1
3
1280x1024 75Hz PCI, Greyscale
GRAPHICS(2)
2
1
4
1280x1024 75Hz PCI, Double buffered, Greyscale
GRAPHICS(2)
2
1
5
1280x768
75Hz PCI
GRAPHICS(2)
2
1
6
800x600
75Hz PCI
GRAPHICS(2)
2
1
7
640x480
75Hz PCI
GRAPHICS(2)
2
1
8
1600x1200 75Hz PCI
GRAPHICS(2)
2
1
9
1600x1200 75Hz PCI, Greyscale
GRAPHICS(2)
2
1
10
1200x1600 75Hz PCI
GRAPHICS(2)
2
1
11
1200x1600 75Hz PCI, Greyscale
GRAPHICS(2)
2
1
12
1280x1024 72Hz
GRAPHICS(2)
2
1
13
1280x1024 72Hz Double buffered
GRAPHICS(2)
2
1
14
640x480
60Hz
GRAPHICS(2)
2
1
15
---------- user defined -----------
Configuration Menu: Enter command>
To set the monitor type for
GRAPHICS
(2) to monitor type 1 type the following at the
command prompt and press
Enter
:
Config Menu: Enter command> monitor graphics(2) 1
This will take effect on the next reboot.
MONITOR INFORMATION
Path
Slot
Head
HPA
Resolution
Freq
Type
Class
-----
-----
----- ------
----------- ------ ---
-------
GRAPHICS(2) 2
1
fffa000000
1280x1024
75Hz
1
PCI
Configuration Menu:
Enter command>