HP B1000 - Manual (Page 177)

Chapter 6 177
Boot Console Handler
Displaying the Status of the I/O slots
Displaying the Status of the I/O slots
The I/O command lets you identify all built-in I/O devices and optional I/O devices
installed in the option slots. It is available in the Information Menu.
To use the IO command from the Information Menu of the boot console, type the following
command at the prompt and press Enter :
Information Menu: Enter command> IO
Information about the built-in and optional I/O devices is displayed.
I/O MODULE INFORMATION
Path Decimal Type Location HVER SVER Vers Dep
---- ------- ---- -------- ---- ---- ---- ---
LAN 10/0/12/0 Ethernet built-in 0060 a200 0x02 0x00
AUDIO 10/0/13/0 Audio built-in
IDE 10/0/14/0 IDE built-in 0060 a300 0x00 0x00
SUPERIO MISC 10/0/14/0 Bridge Device built-in
FLOPPY 10/0/14/1/0 Floppy Disk built-in
SERIAL_1 10/0/14/1/1 RS232 port built-in 0060 8c00 0x01 0x00
SERIAL_2 10/0/14/1/2 RS232 port built-in 0060 8c00 0x01 0x00
PARALLEL 10/0/14/1/3 Parallel port built-in
USB 10/0/14/2 USB built-in 0060 a900 0x95 0x00
SCSI 10/0/15/0 SCSI built-in 0060 a300 0x00 0x00
FWSCSI 10/0/15/1 SCSI built-in 0060 a300 0x00 0x00
GRAPHICS(2) 10/6/2/0 Display slot2 0070 8500 0x01 0x00
Main Menu: Enter command>