Example, See also, Vsdisable – HP R4.2 User Manual

Page 655: Synopsis, Description

Text mode
Original mode

Summary of Commands

vsdisable

UCS 1000 R4.2 Administration 585-313-507

Issue 3 April 2000 616

The fifth block of information describes each destination bit specified in
the destination bit mask, starting with the lowest order bit.

Example

lComp

See Also

logCat

logDstPri

vsdisable

The vsdisable command disables the automatic restarting of the voice
system.

Synopsis

vsdisable

Description

The vsdisable

command is used to prevent the voice system from being

started when the system is rebooted. Running vsdisable allows you to log
into the system before the voice system is started. The voice system may be
started manually at any time with the start_vs

command.