HP R4.2 - Manual (Page 344)

7
Common Administration Command Menu
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 305
Changing the
System Monitor
Refresh Rate By default, the system updates the voice channel status every 5 seconds.
To change the refresh rate to a specified amount of time:
1 Start at the System Monitor-Voice Channels window ( Figure 137 on page
299 ) and press F 8 (Chg-Keys).
The system displays the alternate set of function keys.
2 Press F 1 (Chg-Rate).
The system displays the Change Refresh Rate window ( Figure 138 ).
Figure 138. Change Refresh Rate Window
3 Enter the refresh rate in seconds in the Refresh Rate: field. Valid values
are 1 to 30. The shorter the refresh rate, the more system resources are
used to update the window.
Note: Changing the refresh rate for the System Monitor window also
changes the refresh rate for the Host Session Monitor window and
vice versa.
4 Press F 3 (Save).
The system closes the Change Refresh Rate window and saves the new
rate. The new refresh rate is automatically activated in the system.