HP R4.2 - Manual (Page 470)

A
Summary of Commands dip_int
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 431
dip_int
The dip_int command sends DIP interrupt to a script on a channel or a range
of channels.
Synopsis
dip_int channel
dip_int channelStart-channelEnd
Description
The dip_int command sends a message or messages to TSM requesting
that TSM send interrupt messages to the script running on channel or the
range of channels channelStart-channelEnd . If no script is running on the
channel or if TSM does not own the channel, no action is taken for the
channel. The dip_int
command does not wait for a response from TSM.
Scripts running on the channel receive the EDIPINT event.
! CAUTION:
Be careful when you use this command. It may affect other applications
running on the system.