HP R4.2 - Manual (Page 208)

4
Switch Interface Administration Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 169
Figure 95. Change Parameters: Digital R2 MFC Protocol - Mexico Window
2 Enter the circuit card number in the Card Number: field, or press F 2
(Choices) to select from a menu. Initially, all fields are populated with the
current values for the circuit card number entered.
3 Change any of the parameters described in Assigning the Digital R2 MFC
- Mexico Protocol to E1 Circuit Cards on page 164 .
4 Press F 3 (Save).
The system saves the changed parameters.