HP R4.2 - Manual (Page 629)

A
Summary of Commands spStatus
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 590
RPC Requests Done, RPC Requests Queued, RPC Requests Discard
The number of remote procedure call requests that have been performed, the
number that are waiting to be done, and the number of requests that had to
be discarded before the backlog was too large.
Exception #, Exception Adr
The 680X0 hardware exception number and the name of the exception that
has stopped the 680X0 processor and either sent it to the ROM or to the
debugger and the address where the exception took place. These can be
invaluable in case of a fatal error.
Routine
Currently not used.
PC at last TDM Intr, PC at last DSP Intr
Addresses at which the TDM and DSP last interrupted.
Info Flags
Currently there are two pieces of information conveyed by these flags,
whether the processor is currently within a DSP interrupt and whether it is
within a TDM interrupt. Both, neither, or any combination could be true.
DSP Count
The number of DSP interrupts processed.