HP R4.2 - Manual (Page 637)

A
Summary of Commands sysmon
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 598
code headers are required for speech that is to be used with the voice
system.
See Also
addhdr
sysmon
The sysmon command executes a program that monitors incoming
telephone lines and the associated cards to see that they are functional.
Synopsis
sysmon
Description
The sysmon command verifies that each incoming telephone line and its
associated card are functional. Before initializing the test, locate a touchtone
telephone close to the system controller and get a telephone number to be
used for dialing into the system. Use the assign channel command to assign
to a group any channels you want to test. Then, use the assign
service/startup
command to assign a script to the same group.