HP R4.2 - Manual (Page 152)

3
Voice System Administration Voice Equipment
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 113
3 Enter the equipment group or groups to which you want to unassign the
channels in the
Groups: field. Type a single equipment group number, or
a range of equipment group numbers separated by commas or spaces.
Valid equipment group numbers are 0 to 30, with equipment group 31
used as a reserved group.
4 Press F 3 (Save).
The system unassigns the specified channels from the selected
equipment groups.
LSPS Functions
The LSPS Functions menu option allow you to assign functions to the LSPS
circuit cards, or to change the currently assigned functions of LSPS circuit
cards.
The LSPS card is in the UNASSIGNED state when it is first installed. The
card cannot be put into service while in the UNASSIGNED state. You must
first put the card in the MANOOS state before assignments can be made.
See
Equipment State on page 103 for information on changing states.