HP R4.2 - Manual (Page 613)

A
Summary of Commands spadc
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 574
spadc
The spadc command collects data on the signal processing resources.
Synopsis
spadc [-m min] [-s sec] [-D dir]
Description
The spadc command executes a program that collects data on the voice
system signal processing resource utilization. Data is sampled every
-s
seconds, and average and peak measurements are written to a file called
mm-dd-yyyy for the day of the month and year on which the command was
executed (for example, 09-12-1997). The file is written in the
-D directory
every -m minutes.
The spadc command uses the following options:
• -m — minutes; used to specify how many minutes of data are
represented in each output line of the mm-dd-yyyy file.
• -s — seconds; used to specify how many seconds pass between each
data collection. Valid entries are from 5 to 60. The default is 60.
• -D — directory; used to specify the directory for the output. The default is
/var/adm/spa.