HP R4.2 - Manual (Page 497)

A
Summary of Commands dspActAlarms
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 458
Synopsis
display_tam
There are no arguments for this command.
Description
The display_tam command displays all the values of the sensors monitored
by the TAM unit. If necessary, the display_tam command sends this output
to page.
dspActAlarms
Synopsis
dspActAlarms [-H] [-t cnt] [-b cnt] [-a startTime] [-z endTime]
[-s /searchPat/]
Description
Display the active alarms.
Variables include:
• -H — suppress header lines prior to the first alarm.
• -t lines — tail the last "lines" of file.