HP R4.2 - Manual (Page 190)

4
Switch Interface Administration Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 151
The system displays the T1 A/B Robbed-bit E&M menu ( Figure 88 ).
Figure 88. T1 A/B Robbed-bit E&M Menu
Assigning T1 A/B
Robbed-bit E&M to
Digital Circuit Cards Note: Before a new protocol can be assigned to a circuit card, any
existing protocol must first be
unassigned . See Unassigning T1
A/B Robbed-bit E&M to Digital Circuit Cards on page 161 below
for more information.
Before attempting to make any assignment changes to circuit
cards, they must be in the MANOOS state. See
Equipment State
on page 103 in Chapter 3, Voice System Administration , for more
information.
If you change digital protocol assignments on the voice system,
you must also make the change on the switch.