HP R4.2 - Manual (Page 164)

3
Voice System Administration Voice Equipment
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 125
The system displays the Assign Services to Channels window ( Figure
76 ).
Figure 76. Assign Services to Channels Window
2 In the Channel Numbers: field, enter the channel number or range of
numbers.
Valid numbers range from 0 to the maximum number of channels in the
system. You can enter multiple channels separated by commas or a
range of channels using a dash. For example, an entry of 1, 3–5, 10
specifies channels 1, 3, 4, 5, and 10.
3 Enter the name of the service that will handle the incoming call in the
Service Name: field. Valid names are a string of 16 characters or less, or
press F 2 (Choices) to select from a menu.
A special service name of “*DNIS_SVC” is available. It allows you to
select a number service based on the called and calling numbers. It is
also used when multiple services are supported by a single trunk or when