HP R4.2 - Manual (Page 229)

4
Switch Interface Administration Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 190
• START DIAL SIGNALING PROVIDED BY CPE: WK
• START DIAL SIGNALING PROVIDED TO CPE: WK (senderized
operation)
• CPE DOES NOT SUPPORT DIFFERENT SIGNALING
BIDIRECTIONALLY
• NUMBER OF DIGITS OUTPULSED TO CPE: This number should
match the number selected in the “Maximum Digits in Called
Number” E1/T1 option
• THE CPE CAN ACCEPT “O” AS THE FIRST DIGIT
• GLARE CONTROL: CPE WILL YIELD (WILL RELEASE)
• DIRECT INWARD DIAL (DID): N
• PBX ANSWER SUPERVISION WITHHELD: N
• NETWORK AUTHORIZATION CODES: N
• FRAME FORMAT: D4
• IS PBX SENDERIZED: YES
• CPE TIMING CAPABILITY: loop timed
• SOURCE OF SYNCHRONIZATION PROVIDED BY CPE: NONE
• SOURCE OF AUDIBLE RINGING ON CALLS TO CPE: PBX (CPE)