HP R4.2 - Manual (Page 638)

A
Summary of Commands tas
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 599
Once the channels and service are assigned, enter the sysmon command
followed by the number of pages, or screens, you want to see. Each page
displays 120 to 140 channels.
The resulting display shows all channels and their current states. Note that
only equipped channels can be in the IDLE or MOOS state, while unequipped
channels are followed by dashes (--).
Enter the telephone number for the touchtone telephone. Watch the display
on the monitor and note the channels that receive the call. Follow the
instructions provided by the voice system. Enter 0000 to end the test.
Example
The following example shows page four of the system monitor display.
sysmon 4
tas
The tas command executes the transaction assembler (tas) program to
assemble script instructions.
Synopsis
tas [-e] [-I -T -U -D
-D -Y