HP R4.2 - Manual (Page 565)

A
Summary of Commands logFmt
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 526
logFmt
The logFmt command displays and changes the parameters used to display
messages and explanation texts, specifically the messages mnemonics and
screen width.
Synopsis
logFmt [global] {display|interactive|{opt}={value}}
Description
Each logging message has a class name and a mnemonic name associated
with it. A class name, for example ICK001, is the combination of the name of
the class, for example, ICK, and the index of the message within the class, for
example, 001. The mnemonic name is a short composite string of characters
that identifies the type of logging message. The mnemonic name for ICK001
is ICK_BAD_CMD. By default, the mnemonic names of messages are not
displayed when display messages
is used to examine the logging files. If
you want the mnemonic message names to appear, then logFmt allows you
to alter the system so that they either appear for everyone by default or
appear for you specifically.
You can also adjust the width of the screen display. By default the screen
width is set to 75 characters. If you have a wider screen, you might want to
specify that more of the screen be used to display messages.