Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 90)

3DM 2 (3ware Disk Manager) Introduction
78 3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Viewing Information About Different Controllers
If you have more than one 3ware RAID controller in the system, you select
the one you want to see details about from the drop-down list at the right of
the menu bar.
This drop-down is available on all pages that provide controller-specific
features.
Figure 35. 3DM Controller Selection Drop-down
Refreshing the Screen
You can refresh the data on the screen at any time by clicking Refresh Page
in the menu bar. This causes 3DM to update the information shown with
current information from the controller and associated drives.
Automatic refreshes can also be set. For details, see “Setting the Frequency of
Page Refreshes” on page 85.
Note: Throughout these instructions, the term current controller is used to refer to
the controller which is currently selected in this drop-down list.
Note: The fields and columns in 3DM 2 vary for different models of 3ware RAID
controllers. If you have multiple controllers of different models, you may notice
some differences when switching between them in 3DM. For example, when
displaying information about the 9690SA controllers, 3DM displays “VPort” (for
virtual port) on some pages while for earlier controllers the label is “port.”
Note: If you click Refresh on the browser window instead of on the 3DM menu bar,
you will be taken back to the Summary page.