Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 71)

Driver Installation Under VMware ESX 3.x Server
www.3ware.com 59
8 Unmount the CD.
cd /
umount /mnt/cdrom
and remove the CD from the drive.
9 Reboot the server.
You can now create one or more RAID units. Instructions are available in
the 3ware SAS/SATA RAID Software User Guide, Version 9.5, under
“Configuring Units” on page 85.
Note: If you wish to verify successful installation of the driver, you can use one of
the following commands:
esxupdate -l query
The driver package should be mentioned in the resulting message.
vmkload_mod -l
The driver should be listed as one of the loaded modules.