Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 77)

Working in the 3BM Screens
www.3ware.com 65
Highlight one of the primary buttons on
the main screen:
• Create Unit
• Delete Unit
• Maintain Unit
• Settings
• Information
Alt+C
Alt+D
Alt+M
Alt+S
Alt+I
Specify (or unspecify) a drive as a hot
spare S
Blink the LED associated with a drive F4, from the Drive Information screen
(requires use of a supported
enclosure)
Return to starting values for this session
in the 3ware BIOS Manager F6
Note: F6 cannot bring back previous
policy settings; they are saved when
you exit the Policy screen.
Rescan the controller and update the
status of units and drives Alt+R
Return to the main 3ware BIOS Manager
screen, from the Advanced Details
screen Any key
Move a highlighted unit up or down in the
list of exportable units
(The top-most unit will become the
bootable unit, if you install the OS.)
Page Up
Page Down
(Available only when there are
multiple units and a unit is
highlighted.)
Display context sensitive help F1 or Alt-F1
If you have multiple 3ware controllers in
your system, return to the board selection
screen. Esc
Exit the utility and save or abandon all
changes. Esc
Exit the utility and save all changes F8
Table 7: Working in 3BM
To do this Use these keys