About this user guide, How this user guide is organized – Avago Technologies 3ware 9650SE-12ML (Channel) User Manual
Page 9
ix
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
About this User Guide
This document, 3ware SAS/SATA RAID Software User Guide, Version 9.5.1,
provides instructions for configuring and maintaining RAID units on 3ware
9690SA and 9650SE series RAID controllers, using software and firmware
version 9.5.1.
This guide assumes that you have already installed your 3ware RAID
controller and drives in your system and any enclosures, if you have them. If
you have not yet done so, see the installation guide that came with your
controller. If you do not have the printed copy, a PDF of the installation guide
is available on your 3ware CD, or you can download it from:
t there are different
installation guides for different 3ware RAID controller models.)
There are often multiple ways to accomplish the same configuration and
maintenance tasks for your 3ware RAID controller. This manual includes
instructions for performing tasks using two tools:
•
3ware BIOS Manager (3BM), which runs at the BIOS level
•
3ware Disk Manager 2 (3DM 2), which runs in a browser
You can also perform many tasks at the command line, using 3ware’s
Command Line Interface (CLI). The CLI is described in a separate manual:
3ware SAS/SATA RAID Controller CLI Guide. Information from both this
Users Guide and the CLI Guide are also available in the 3ware HTML
Bookshelf, available in the 3ware Documentation folder and on your 3ware
CD. (For more information, see “Using the 3ware HTML Bookshelf” on
page xi.)
How this User Guide is Organized
Table 1: Chapters and Appendices in this Guide
Chapter/Appendix
Description
1. Introduction
Provides an overview of product features for the
3ware 9690SA and 9650SE controller models.
Includes system requirements and an introduction to
RAID concepts and levels.