See figure 49) – Avago Technologies 3ware 9650SE-12ML (Channel) User Manual
Page 120
Configuring Units
108
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Figure 49. Asterisks Next to Selected Drives
2
After all drives for the unit are selected,
Tab
to the
Create Unit
button
and press
Enter
.
3
On the
3ware Disk Array
screen, make sure that the proper drives are
listed.
Figure 50. Create Disk Array Display
4
(Optional) Press
Enter
and type a name for the unit; then press
Enter
again to set the name.
Tip:
If you want to use all available drives, press
Alt-A
to select
them all.
Tip:
You can also press
Alt-C
to choose Create Unit.