Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 147)

Deleting a Unit
www.3ware.com 135
Figure 58. Unit Successfully Deleted through 3DM
Deleting a Unit through 3BM
In 3BM, the command for deleting a unit is on the main 3BM screen.
To delete a unit through 3BM
1 At the main 3BM screen, select the unit in the list of Exportable Units by
highlighting it and pressing
Enter or Space .
An asterisk appears in the left-most column to indicate that it is selected.
2 Tab to the Delete Unit button and press Enter .
3 On the Delete Disk Array screen, review the information about the unit to
make sure it is the one you want to delete.
Note: If you want to delete an incomplete drive or unusable unit, or a
drive that appears with a message such as “Unsupported DCB,”
select it in a similar manner and then select
Delete Unit , even
though it appears in the list Incomplete Drives and Others .
Warning: Any data on the unit will be lost once the unit is deleted.
Backup any data that you want to keep.