Avago Technologies 3ware 9650SE-12ML (Channel) User Manual
Page 165
Locating a Drive by Blinking Its LED
www.3ware.com
153
•
Choose
Monitor > Enclosure
from the main menu in 3DM. On the
list of enclosures, click the ID number of the enclosure. On the
Enclosure Detail page, identify the drive you want to physically
locate.
2
Check the box in the
Identify
column.
The LED on the enclosure begins blinking.
3
When you are finished working with the drive and no longer need to see
the LED, return to this page and uncheck the
Identify
box.
To blink the LED for a drive through 3BM
1
On the main 3BM screen,
Tab
to
Information
and press
Enter
.
2
On the pop-up menu, select
Drives
and press
Enter
.
3
On the Drive Information page, use the arrow keys to select the drive you
want to identify.
4
Press
F4
.
The LED on the enclosure begins blinking. (Note that this feature is only
available for drives in enclosures.)
5
When you are finished working with the drive and no longer need to see
the LED, return to this page and press
F4
again to halt the blinking.
To blink the LEDs for all drives in a unit
1
Choose
Information > Unit Information
from the main menu in 3DM.
2
On the Unit Information page, identify the unit you are interested in.
3
Check the box in the
Identify
column.
The LEDs for the drives in the selected unit begin blinking.
4
When you no longer need to see the LEDs, return to this page and
uncheck the
Identify
box.