8032 enclosure power removed, 8033 enclosure power added, 8034 enclosure power unknown – Avago Technologies 3ware 9650SE-12ML (Channel) User Manual
Page 320
Troubleshooting
308
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Action
Reseat the power supply cord. Replace any failed power supply as soon as
possible.
It is recommended to use an uninterruptible power supply (UPS) to protect
against power failures.
8032 Enclosure power removed
Event Type
Warning.
Cause
Applies only to the 9690SA controller.
One of the enclosure power supplies has been removed from the enclosure or
a power supply is unplugged.
Action
Return or reconnect the power supply as soon as possible.
It is recommended to use an uninterruptible power supply (UPS) to protect
against power failures.
8033 Enclosure power added
Event Type
Information.
Cause
Applies only to the 9690SA controller.
A power supply has been added to the enclosure or an existing power supply
has been plugged in.
Action
None required.
8034 Enclosure power unknown
Event Type
Warning.