Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 257)

Enclosure Details page
www.3ware.com 245
Enclosure ID
Status. The status of the enclosure.
Vendor. The manufacturer of the enclosure.
Product ID. The product ID of the enclosure.
Revision. The manufacturer’s revision number for the enclosure.
Diagnostic. Click the Diagnostic Text link to download a log of enclosure
diagnostic information to your computer. If you contact AMCC for support
with your controller, they may ask you to use this feature. It may help AMCC
identify the problem you encountered.
Controller ID. The ID of the controller connected to the enclosure.
Fan Summary
Fan. Lists the ID number associated with the fan.
Status. Will be one of OK, Failure, Not Installed, Unknown, or Off. For
status definitions, see “Fan Status” on page 209.
State. Will be ON or OFF.
Speed. Fan speed is automatically controlled by the enclosure monitoring
software to maintain correct enclosure temperature. Possible settings are
Stopped, Lowest, Second Lowest, Third Lowest, Intermediate, Third Highest,
Second Highest, Highest, and Unknown.
RPM. The fan speed in revolutions per minute.
Identify. If supported by the enclosure manufacturer, checking this box will
cause an LED to blink on the enclosure containing the specified fan. If the box
is grayed, identify is not supported.
Temp Sensor Summary
Temp Sensor. The ID number of the specified temperature sensor.
Status. The status of the temperature sensor. Can be OK, Failure, Not
Installed, Off, or Unknown. In addition, there are threshold warnings of Over
Temp Failure, Over Temp Warning, Under Temp Warning, and Under Temp
Failure. For status definitions, see “Temp Sensor Status” on page 210.
Temperature. The temperature of the enclosure in Centigrade and Fahrenheit.
Identify. If supported by the enclosure manufacturer, checking this box will
cause an LED to blink on the enclosure containing the specific temperature
sensor. If the box is grayed, identify is not supported.