Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 74)

3ware BIOS Manager (3BM) Introduction
62 3ware SAS/SATA RAID Software User Guide, Version 9.5.1
You see a screen similar to the warning message below, warning you that
changing your disk array configuration may overwrite data on the disks.
Figure 28. Warning Message When you Start 3BM
6 Press any key to continue to the 3BM BIOS Manager screen.
Exiting the 3BM Configuration Utility
When you are ready to exit the 3BM configuration utility, you have the option
to save the configuration changes you have made, or to discard the changes.
To save your configuration modifications
1 Press the F8 or Esc key.
A list of affected drives appears, and a messages ask you to confirm the
configuration.
2 Type Y .
The booting process resumes.
To exit without saving changes
1 Press Esc.
2 If you have unsaved changes, 3BM will ask you whether you want to save
the changes and exit, or exit without saving the changes.
If you want to exit without saving changes, type N .
If you change your mind and want to save the changes, type Y .