Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 102)

Configuring Your Controller
90 3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Viewing Controller Policies
You can view the current state of controller policies in 3DM, in the Other
Controller Settings section at the bottom of the Controller Settings page (See
Figure 38). Only the Auto Rebuild, Auto-Carving, and Carve Size policies
can be changed on this page. The other policies can be changed in 3BM or
through the CLI. For a summary of the initial default settings, see Table 6,
“Default Settings for Policies and Background Tasks,” on page 20.
To view controller policies in 3DM
• Choose Management > Controller Settings from the menu bar.
The policies that appear under Other Controller Settings vary, depending
on the controller model you are using.
Figure 38. 3DM Controller Settings Page