Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 161)

Checking Unit and Drive Status through 3DM
www.3ware.com 149
Tip: You can scroll both sections of the Drive Information page to bring
additional drive information or drives into view. Press Tab to move
between the two sections.
Figure 63. Drive Information page (3BM)
Enclosure Drive LED Status Indicators
If you have a supported enclosure, the LEDs on your enclosure may be able to
provide some status information about your drives and units.
Note: The following table is an example of how LEDs may be used. Check with
your chassis or enclosure documentation for more details. Not all features may be
supported or implemented in the same way on all chassis.list of supported
enclosures is available at
http://www.3ware.com/products/sys_compatibility.asp
Table 11: Meaning of LED Colors and Behavior
Color Drive Status
Solid green OK
Blinking green Identify
This occurs when you have used the Identify command in 3DM
to locate a particular drive or unit. (See “Locating a Drive by
Blinking Its LED” on page 152.)
Black No drive
Solid Amber Hot spare
Blinking amber Rebuilding
The drive in this slot is part of a RAID unit that is currently
rebuilding. You can continue to use the unit. For more
information, see “Rebuilding Units” on page 167.