Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 36)

First-Time RAID Configuration Using 3BM
24 3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Figure 10. 3ware Controller Board Selection Screen
You will see a screen similar to Figure 9, warning you that changing your
disk array configuration may overwrite data on the disks.
To select the drives and create a unit
1 Select the drives to be included by highlighting each one and pressing
Enter to select it, or select all at once by selecting the heading above
them.
When you select a drive, an asterisk appears next to it in the left-most
column (see Figure 11).
You may include from one to thirty-two drives in the unit, depending on
the number available.
Figure 11. Asterisks Next to Selected Drives
2 After all drives for the unit are selected, use the Tab to move to the
Create Unit button and press Enter.
The Create Disk Array screen appears (see Figure 12).