Epson Equity 286 PLUS - Manual (Page 95)

Changing the Jumper Settings
If you change your computer’s configuration or need to alter the
way it operates, you may need to change a jumper setting inside
the computer.
A jumper is a small electrical connector that controls one of the
computer’s functions. The jumper settings in your computer are
preset at the factory; however, you can alter the following
functions by changing the standard settings:
Set the computer to use an 8 or
10 MHz
math coprocessor
Enable or disable the password function
Set the computer to use a color or monochrome monitor
Enable or disable the built-in mouse connector
Enable or disable the built-in VGA display adapter.
If you need to change any jumper settings, follow the
instructions in this section.
Installing and Removing Options
5-5