Epson Equity 286 PLUS - Manual (Page 87)

5. The program then asks for the name of a file where the
changes for the new configuration are to be saved. Type the
following and press
Enter:
WS132.EXE
6. At the Main Installation Menu, select Console.
7. From the console menu, select Mon i t or .
8. Thenchoose Screen Sizing.
9. At the Screen Siring menu, select B (for width), type 132,
and press Enter. Press X at each menu to exit from the
installation program.
10. When the installation program asks if you want to save the
new configuration, press Y. The program saves the new
configuration in the WS132.EXE file and the computer
displays the MS-DOS command prompt.
11. Type the command below and press Enter to specify
132-column text mode:
VGAMODE 132, 25
12. Type the following and press Enter to start WordStar:
WS132
After you exit WordStar, if you want to return to 80-column
mode, type the following and press Enter:
VGAMODE 80, 25
Enhancing System
Operations
4-15