Epson, Equity, 286 plus user’s guide correction – Epson Equity 286 PLUS User Manual

Page 7

Epson

Equity

286 PLUS

User’s Guide Correction

Please note that the setting of jumper J6 on your computer’s main

system board, described on page 5-7, should be as follows:

*Factory setting

Also note that the jumper settings described on page D-6 should be

reversed. To disable the password function, set jumper J6 to position

B. To enable the password function, set jumper J6 to position A.

On pages 5-13 through 5-17, the illustrations and descriptions of

your computer’s option slots indicate that the 8-bit slot is slot

number 1 and that the 16-bit slots are numbers 2 through 4. The

8-bit option slot is actually slot number 4 and the 16-bit slots are

slot numbers 1 through 3. Please keep this in mind as you read

these pages.

Epson is a

registered trademark of Seiko Epson Corporation.

Equity

registered trademark of Epson America,

Inc.