Error logging, No. of passes – Epson Equity 286 PLUS User Manual
Page 200
If you selected Passbound testing, you see this prompt:
No.
of passes :
00001
Specify the number of times (from
1
to 65535) you want the
program to run the test(s). Or press
Enter
without entering a
number to select the default of one pass. You can use the
backspace key to make corrections.
Note
In most cases, running a test once is sufficient. Multiple
passes test the reliability of essential functions only.
Error Logging
When you request error logging, you see this submenu:*
Log errors on disk
Log errors to printer (LPTl)
Log
errors to serial port
No
error logging
Press ” or “ to highlight the device on which you
want the
program to log the error messages and press
Enter.
(Press E
SC
to
exit the menu and return to the Error logging prompt.)
If you select
N
O
error logging, the program changes the
error logging response from
Y
to
N.
If you select the printer (LPTl), the program writes the error
messages to the device connected to the parallel
port
assigned
LPT1. If you select the serial port, the program writes the error
messages to the device connected to the COMl serial port.
C-6
Performing
System Diagnostics