Epson Equity 286 PLUS User Manual

Page 176

Locate the hard disk drive ribbon cable that you removed
from the drive in the vertical mounting position. Follow the

instructions below to attach the connector on the end of

this cable to the drive that will be mounted vertically.

As shown below, there are two rows of holes in the

connector. One of the holes is blocked with a plastic plug.

Pick

the hard disk drive that you removed from the

vertical mounting position. Notice the ribbon cable socket
on the back of the drive; you see two rows of pins. In one of
the rows, a pin is missing.

missing pin

Installing and

Removing Disk Drives

B-37